Cyclone Classic Pro 2200W 20Gal Stainless Steel Residential Gutter Vac — Gold Standard Bundle w/ 28ft Carbon Fiber Pole Kit, 50ft Hose, Camera, Gloves & Bags

Cleaning high gutters on multi-story homes means risky ladder work, stubborn debris, and clogged sections that slow the whole job down. The 20-Gallon Cyclone Classic Pro Gutter Vacuum, paired with its 28-foot lightweight carbon fiber pole kit, gives you the reach and suction to clear buildup up to three stories high while you stay safely on the ground. This Gold Standard Bundle lands ready for the job with everything you need: a vacuum, a pole kit, 50-foot hose, a 4K inspection camera, and a full set of transport bags and gloves.

🚀 Key Features

• Dual-Motor Power (2200W): Two 1100W motors deliver strong, steady suction with 95 inches of water lift and 119 CFM airflow to pull wet debris, compacted leaves, and standing water out of the gutter. A float valve shuts the motors off when the tank fills, keeping water and debris out of the motor housing.
• Optimized Cyclonic Airflow: The 2-inch ID polypropylene side inlet builds strong cyclonic action inside the tank, supporting suction and improving debris separation on wet gutter waste.
• 20-Gallon Stainless Steel Tank: Large-capacity debris storage reduces emptying stops and maximizes active cleaning time.
• Reusable Cloth Filter: Works for both wet and dry use, washes clean easily, and cuts down on the repeated cost of disposable filters.
• Integrated Steel Cart with All-Terrain Wheels: A robust, easy-to-move steel frame with large rear wheels and locking front casters travels smoothly across driveways, walkways, lawns, and mixed job site surfaces.
• Integrated Drain Hose: Empties collected liquid from the tank quickly, cutting cleanup time at the end of the job.

⚙️ Technical Specifications

• Usage: Residential / Light Commercial
• Running Wattage: 2200W
• Motors: 2 x 1100 Watt
• Tank Capacity: 20 Gallons
• Tank Material: Stainless Steel
• Airflow: 108 CFM
• Water Lift: 95 inches
• Electrical: 120 Volts / 60 Hz
• Plug Type: Standard 3-Prong (120V)
• Side Inlet: 2-inch ID Cyclonic Side Entry (Polypropylene)
• Included Hose: 50 feet (2-inch ID)
• Power Cord Length: 35 feet
• Dimensions (w/ Cart): 41 inches H x 17 inches W x 17.5 inches D
• Weight: 59 lbs
• Frame: Welded Steel Frame with Handle, Tilting Chassis

🧗 28 Foot Carbon Fiber Clamping Pole Kit

The included lightweight carbon fiber clamping poles provide a rigid, easy-to-handle setup that lets you safely clean gutters up to 2-3 stories high (approx. 28 feet) with less strain over longer sessions. A quick-release clamp design allows fast setup and secure operation while cutting fatigue through the job.

Safety-Enhanced Kevlar Base Section

The lower portion of the pole, where your hands are placed during operation, is reinforced with an integrated layer of DuPont™ Kevlar® woven into the carbon fiber. This strengthens the most frequently handled area and adds protection against the bumps, drops, and contact common on active job sites. It also adds a secondary layer of protection during brief, accidental contact with electrical sources such as overhead lines.

It is important to note that the pole is still primarily carbon fiber, which conducts electricity. The Kevlar reinforcement does not make the pole safe around live high-voltage lines or serious electrical hazards. Always maintain a safe working distance from all power sources.

Pole Kit Includes:

• 28 ft Pole - 7 x 4 foot pole sections (For 2-3 stories)
• 135-degree Silicone U-Bend
• Aluminum Angled Nozzle
• Aluminum Straight Nozzle
• Aluminum Gulper Nozzle
• 3 Silicone Hose Adaptors (2-inch - 2-inch, 2-inch - 1 1/2-inch, and 2-inch - 1 3/4-inch)

📦 Included Accessories

The Wireless 4K Inspection Camera clamps onto your pole and beams a live feed to your phone or tablet over WiFi, recording 4K Ultra HD video and 16MP before-and-after photos you can drop straight into client invoices. It runs up to 4 hours per charge and arrives with a waterproof cover, a cellphone holder, a mounting bracket, a USB cable, a battery charger, two spare batteries, a 32GB microSD card, and a hard carry case.

The heavy-duty Pole Carry Bag is built from double-wall abrasion-resistant polyester with top and side handles, a padded shoulder strap, and a roomy accessories pouch for brackets, elbows, and cuffs. It holds a full pole kit plus two spare poles and measures 56" x 16" x 18".

The Hose Bag is constructed from ballistic nylon with foam padding on every side and piping-reinforced seams, sized to carry the full 50-foot hose. It measures 26 inches in diameter by 11 inches high and features a padded double-webbed handle for a firm, comfortable grip.

The Cyclone Cart Bag mounts straight to your cart frame so accessories stay with the machine between jobs. It packs dual side pockets for nozzles and adaptors, a reinforced top handle, an adjustable padded shoulder strap, and a heavy-duty zip closure in tough water-resistant fabric.

The reinforced-palm Work Gloves place a hard-wearing synthetic-leather shield between your hands and a full day of pole, hose, and debris handling. Padded palm and thumb zones soak up pressure, a breathable knit back keeps hands cool, and an adjustable wrist strap with an extended neoprene cuff seals out grit and dust.

🚚 Shipping Information

This vacuum and pole kit ships palletized via a third-party Less-Than-Truckload (LTL) freight provider. Once the carrier picks up your order, you will receive an email with the freight company details, PRO number, and tracking link, and the carrier will contact you directly to arrange a delivery appointment after the shipment reaches your local depot.